Skip to main content
Sleep

What Is the Best Temperature for Sleep?

Lindsay Boyers, CHNCSophie Vergnaud, MD
Written by Lindsay Boyers, CHNC | Reviewed by Sophie Vergnaud, MD
Updated on January 22, 2025
Featuring Stacia Woodcock, PharmD, Preeti Parikh, MDReviewed by Karen Hovav, MD, FAAP | October 1, 2025

Key takeaways:

  • Temperature is an important factor in determining how well you sleep.

  • Most people sleep best when their room is between 60°F and 67°F (about 16°C and 19°C).

  • If your bedroom is too hot, it can disrupt your sleep and cause you to wake up more often in the middle of the night.

Featuring Stacia Woodcock, PharmD, Preeti Parikh, MDReviewed by Karen Hovav, MD, FAAP | October 1, 2025

Temperature — both body and room temperature — plays an important role in your sleep. If your room is too hot, it can disrupt sleep. If it’s too cold, it may interfere with your ability to relax. 

One-third of adults experience regular sleep disturbances, like trouble falling or staying asleep. So anything you can do –– like setting your thermostat to an ideal temperature –– to support restful sleep is important. 

But what is the best temperature for sleep, exactly? Most experts agree that your room should be between 60°F and 67°F (16°C and 19°C), but there’s more to consider.

How does temperature affect sleep?

Your body temperature is tied to your circadian rhythm, a 24-hour biological clock that controls when you wake up and fall asleep. Body temperature goes up and down throughout the day. But it’s highest at about 6 p.m. and then drops as your body gets ready to sleep. 

This drop in temperature signals to your body that it’s time to go to bed. In an ideal situation, your body temperature stays low throughout the night and then rises again shortly before you wake up.

This temperature fluctuation, or thermoregulation, is crucial to getting a good night’s sleep

“Even slight changes in body temperature can send powerful signals to our body’s internal clock,” said Kent Smith, MD, DDS, D-ABDSM, past president of the American Sleep and Breathing Academy, and chief medical officer of Sleep Dallas

In other words, if anything works against this natural drop in core body temperature, it can make falling or staying asleep more difficult. The temperature in your bedroom is also an important factor in determining how well you’ll sleep. 

How does poor sleep quality affect your health?

Short-term sleep disruption can make you feel more irritable and stressed. It can reduce your productivity and ability to make sound decisions. This can affect your work quality and ability to function at your best.

GoodRx icon

Long-term sleep deprivation can increase your risk of various health issues, such as obesity, heart disease, diabetes, and dementia. It also may negatively affect your immune system.

What is the best temperature for sleep?

While everyone is a bit different, there’s an ideal temperature range for getting your best sleep. 

“Most people sleep best when their bedroom temperature is between 60°F and 67°F [16°C to 19°C],” Smith said. “In fact, one of the most common reasons people wake up in the middle of the night is because their bedroom is too warm or they are using too heavy of a blanket.”

If your room is too cold or too hot, it can negatively affect your sleep quality by interfering with your natural sleep cycles.

What can happen if your bedroom is too hot?

When your bedroom is too hot, you might wake up more often throughout the night. Even if you don’t wake up, it can interfere with your body’s ability to thermoregulate — or control your internal core temperature. This can decrease both rapid eye movement (REM) sleep and slow-wave sleep. 

REM sleep is connected to learning new information, brain development, and better mental health. If you don’t get enough of it, you may have trouble managing your mood and find it more difficult to remember certain skills.

Slow-wave sleep is the deep sleep stage. It plays roles in memory, muscle repair, and immune function. You need ample slow-wave sleep to feel rested when you wake up.

Why are cooler temperatures better for sleep?

On the flip side, cooler room temperatures make it easier for your body to lower its core internal temperature, which is a signal for good, restful sleep.

But you don’t want your room to be too cold. While cold temperatures don’t affect your sleep cycles, studies suggest that the cold may affect your heart’s autonomic response during sleep, which could have health effects.

However, it’s worth noting that many of these older studies were done in abnormal conditions (without pajamas or bedding) where people were especially cold. In real-life circumstances, you’d likely have clothes and bedding to provide insulation and protect you from cooler air. 

What are the best ways to regulate your temperature while sleeping?

So, how can you ensure that you’re sleeping at the ideal temperature? Unfortunately, you can’t fully control your body’s core temperature, but there are some things you can do to set yourself up for sleep success:

  • Think of your bedroom as a cool, dark cave. If you can change the temperature in your room, set your thermostat to 60°F to 67°F (16°C to 19°C). If you can’t set the thermostat, open windows, and use fans on hot days. 

  • Using cooling pillows and a mattress or mattress topper that doesn’t absorb body heat may be helpful, too.

  • Avoid vigorous exercise or other strenuous activities within 3 hours of bedtime. This activity might raise your body temperature, making it harder to fall asleep. 

  • Take a warm bath or shower. It may seem counterintuitive, but there’s some evidence that a short, warm bath or shower 1 or 2 hours before bedtime may help you fall asleep faster.

  • Avoid screens — including your phone, TV, and computer — as much as possible at night. Exposure to blue light might hinder that natural drop in body temperature and suppress melatonin. Instead, listen to soothing music or read a book

  • Use breathable sheets and pajamas. Smith recommends ​​cotton or bamboo.

Frequently asked questions

The temperature of your room should be the same when you fall asleep as when you wake up. The best temperature for sleep is between 60°F and 67°F (16°C and 19°C). You could set the thermostat to a warmer temperature when you need to wake up, if you want to warm up your home before getting out of bed. 

The ideal temperature for sleeping is the same in summer as it is in winter. It may be harder to keep your bedroom cool enough in summer. Some people don’t have air conditioning, and it can be expensive to keep your home at 67°F (19°C). You can switch to lighter blankets and pajamas in the summer to help keep you cooler while you sleep. 

You sleep best when your internal body temperature drops a little, which naturally occurs at night. But if you sleep in a room that’s too warm, your body temperature may rise back up, which can disrupt your sleep. If you use heavy blankets, like down comforters, it can also cause you to overheat — and you may wake up sweating and throwing your covers off. 

The bottom line

Temperature has an impact on your sleep. If your room is too hot or cold, it can affect your sleep quality and leave you tossing and turning all night. The best temperature for sleep falls somewhere between 60°F and 67°F (16°C and 19°C).

why trust our exports reliability shield

Why trust our experts?

Lindsay Boyers, CHNC, is a functional nutritionist, licensed esthetician, writer, and editor with over a decade of experience in evidence-based health, wellness, and skincare writing.
Laurie Tarkan
Edited by:
Laurie Tarkan
Laurie Tarkan is a senior health editor for general health and well-being at GoodRx. She has an extensive background in health journalism, and wrote regularly for The New York Times for a decade.
Sophie Vergnaud, MD, is the Senior Medical Director for GoodRx Health. A pulmonologist and hospitalist, she practiced and taught clinical medicine at hospitals in London for a decade before entering a career in health education and technology.

References

GoodRx Health has strict sourcing policies and relies on primary sources such as medical organizations, governmental agencies, academic institutions, and peer-reviewed scientific journals. Learn more about how we ensure our content is accurate, thorough, and unbiased by reading our editorial guidelines.

Was this page helpful?

Latest articles